| 706-2400/401-300 |
WAGO Corporation |
System cable; for Siemens S7-400; 8 analog inputs; Length: 3 m; Conductor cross-section: 0.25 mm² |
| 706-2400/500-100 |
WAGO Corporation |
System cable; for Siemens S7-400; 8 analog outputs (current); Length: 1 m; Conductor cross-section: 0.25 mm² |
| 706-2400/501-100 |
WAGO Corporation |
System cable; for Siemens S7-400; 8 analog outputs (voltage); Length: 1 m; Conductor cross-section: 0.25 mm² |
| 706-2400/201-200 |
WAGO Corporation |
System cable; for Siemens S7-400; 8 digital outputs for higher voltages; Length: 2 m; Conductor cross-section: 0.34 mm² |
| 706-7753/304-100 |
WAGO Corporation |
System cable; for WAGO-I/O-SYSTEM, 750 Series; 2 x 8 analog inputs or outputs; Length: 1 m (1 MOhm); Conductor cross-section: 0.14 mm² |
| 706-7753/304-200 |
WAGO Corporation |
System cable; for WAGO-I/O-SYSTEM, 750 Series; 2 x 8 analog inputs or outputs; Length: 2 m; Conductor cross-section: 0.14 mm² |
| 706-7753/304-300 |
WAGO Corporation |
System cable; for WAGO-I/O-SYSTEM, 750 Series; 2 x 8 analog inputs or outputs; Length: 3 m; Conductor cross-section: 0.14 mm² |
| 706-7753/306-100 |
WAGO Corporation |
System cable; for WAGO-I/O-SYSTEM, 750 Series; 2x 8 digital inputs or outputs; Length: 1 m (1 MOhm); Conductor cross-section: 0.14 mm² |
| 706-7753/306-200 |
WAGO Corporation |
System cable; for WAGO-I/O-SYSTEM, 750 Series; 2x 8 digital inputs or outputs; Length: 2 m; Conductor cross-section: 0.14 mm² |
| 706-7753/306-300 |
WAGO Corporation |
System cable; for WAGO-I/O-SYSTEM, 750 Series; 2x 8 digital inputs or outputs; Length: 3 m; Conductor cross-section: 0.14 mm² |
| 706-7753/301-200 |
WAGO Corporation |
System cable; for WAGO-I/O-SYSTEM, 753 Series; 16 digital inputs or outputs; Length: 2 m; Conductor cross-section: 0.14 mm² |
| 706-7753/602-200 |
WAGO Corporation |
System cable; for WAGO-I/O-SYSTEM, 753 Series; 4 analog inputs or outputs; Length: 2 m; Conductor cross-section: 0.25 mm² |
| 706-7753/302-100 |
WAGO Corporation |
System cable; for WAGO-I/O-SYSTEM, 753 Series; 8 digital inputs and 8 digital outputs; Length: 1 m (1 MOhm); Conductor cross-section: 0.14 mm² |
| 706-7753/302-200 |
WAGO Corporation |
System cable; for WAGO-I/O-SYSTEM, 753 Series; 8 digital inputs and 8 digital outputs; Length: 2 m; Conductor cross-section: 0.14 mm² |
| 706-7753/300-100 |
WAGO Corporation |
System cable; for WAGO-I/O-SYSTEM, 753 Series; 8 digital inputs or outputs; Length: 1 m (1 MOhm); Conductor cross-section: 0.14 mm² |
| 706-7753/300-200 |
WAGO Corporation |
System cable; for WAGO-I/O-SYSTEM, 753 Series; 8 digital inputs or outputs; Length: 2 m; Conductor cross-section: 0.14 mm² |
| 750-613/040-000 |
WAGO Corporation |
System Power Supply; 24 VDC; Extreme; dark gray |
| 750-613 |
WAGO Corporation |
System Power Supply; 24 VDC; light gray |
| 20886411015 |
Harting |
Systemkab.Han-Q4/2 Sti+Bu 5x4qmm 1,5m |
| 20886411150 |
Harting |
Systemkab.Han-Q8/0 Ku.4qmm Sti+Bu 15m |
| 20886411030 |
Harting |
Systemkab.Han-Q8/0 Ku.Sti+Bu 3 m |
| 790-398 |
WAGO Corporation |
T-connector; for busbars Cu 10 mm x 3 mm; gray |
| 890-1615 |
WAGO Corporation |
T-distribution connector 2-pole Cod. A, black |
| 770-1606 |
WAGO Corporation |
T-distribution connector 2-pole Cod. A, black |
| 770-1615 |
WAGO Corporation |
T-distribution connector 2-pole Cod. A, black |
| 890-1656 |
WAGO Corporation |
T-distribution connector 2-pole Cod. A, white |
| 890-1665 |
WAGO Corporation |
T-distribution connector 2-pole Cod. A, white |
| 890-1606 |
WAGO Corporation |
T-distribution connector 2-pole Cod. A; black |
| 770-1701 |
WAGO Corporation |
T-distribution connector 2-pole Cod. B, gray |
| 890-1601 |
WAGO Corporation |
T-distribution connector 2-pole Cod. B, gray |
| 770-1601 |
WAGO Corporation |
T-distribution connector 2-pole Cod. B, gray |
| 890-1602 |
WAGO Corporation |
T-distribution connector 2-pole Cod. B, light green |
| 890-1702 |
WAGO Corporation |
T-distribution connector 2-pole Cod. B, light green |
| 890-1617 |
WAGO Corporation |
T-distribution connector 2-pole Cod. I, blue |
| 890-1620 |
WAGO Corporation |
T-distribution connector 2-pole Cod. I, blue |
| 770-606 |
WAGO Corporation |
T-distribution connector 3-pole Cod. A, black |
| 890-606 |
WAGO Corporation |
T-distribution connector 3-pole Cod. A, black |
| 770-615 |
WAGO Corporation |
T-distribution connector 3-pole Cod. A, black |
| 770-656 |
WAGO Corporation |
T-distribution connector 3-pole Cod. A, white |
| 770-665 |
WAGO Corporation |
T-distribution connector 3-pole Cod. A, white |
| 890-656 |
WAGO Corporation |
T-distribution connector 3-pole Cod. A, white |
| 890-665 |
WAGO Corporation |
T-distribution connector 3-pole Cod. A, white |
| 890-615 |
WAGO Corporation |
T-distribution connector 3-pole Cod. A; black |
| 770-970 |
WAGO Corporation |
T-distribution connector 3-pole Cod. B, gray |
| 770-667 |
WAGO Corporation |
T-distribution connector 3-pole Cod. R, orange |
| 770-626 |
WAGO Corporation |
T-distribution connector 4-pole Cod. A, black |
| 770-627 |
WAGO Corporation |
T-distribution connector 4-pole Cod. A, black |
| 890-626 |
WAGO Corporation |
T-distribution connector 4-pole Cod. A, black |
| 890-627 |
WAGO Corporation |
T-distribution connector 4-pole Cod. A, black |
| 770-676 |
WAGO Corporation |
T-distribution connector 4-pole Cod. A, white |
| 890-676 |
WAGO Corporation |
T-distribution connector 4-pole Cod. A, white |
| 890-677 |
WAGO Corporation |
T-distribution connector 4-pole Cod. A, white |
| 890-1631 |
WAGO Corporation |
T-distribution connector 4-pole Cod. B, gray |
| 770-1631 |
WAGO Corporation |
T-distribution connector 4-pole Cod. B, gray |
| 770-621 |
WAGO Corporation |
T-distribution connector 5-pole Cod. A, black |
| 770-622 |
WAGO Corporation |
T-distribution connector 5-pole Cod. A, black |
| 890-622 |
WAGO Corporation |
T-distribution connector 5-pole Cod. A, black |
| 770-671 |
WAGO Corporation |
T-distribution connector 5-pole Cod. A, white |
| 770-672 |
WAGO Corporation |
T-distribution connector 5-pole Cod. A, white |
| 890-621 |
WAGO Corporation |
T-distribution connector 5-pole Cod. A; black |
| 770-1641 |
WAGO Corporation |
T-distribution connector 5-pole Cod. B, gray |
| 770-1741 |
WAGO Corporation |
T-distribution connector 5-pole Cod. B, gray |
| 890-617 |
WAGO Corporation |
T-distribution connector 5-pole Cod. I, blue |
| 890-620 |
WAGO Corporation |
T-distribution connector 5-pole Cod. I, blue |
| 770-617 |
WAGO Corporation |
T-distribution connector 5-pole Cod. I; blue |
| 770-620 |
WAGO Corporation |
T-distribution connector 5-pole Cod. I; blue |
| 2857-535/000-001 |
WAGO Corporation |
T-TRANSDUCER |
| 2857-535 |
WAGO Corporation |
T-TRANSDUCER UI |
| 750-925 |
WAGO Corporation |
Tandem-Piezo acceleration sensor |
| 772-262 |
WAGO Corporation |
Tap-off module for flat cable 5 x 2.5 mm² + 2 x 1.5 mm², black |
| 772-263 |
WAGO Corporation |
Tap-off module for flat cable 5 x 2.5 mm² + 2 x 1.5 mm², black |
| 772-265/060-000 |
WAGO Corporation |
Tap-off module for flat cable 5 x 2.5 mm² + 2 x 1.5 mm², gray |
| 870-426 |
WAGO Corporation |
Tap-off module; modular; suitable for 870 Series terminal blocks with jumper slots in the current bar; gray |
| 870-425 |
WAGO Corporation |
Tap-off module; with anti-rotation protection; modular; suitable for 870 Series terminal blocks with jumper slots in the current bar; 2,50 mm²; gray |
| 857-818 |
WAGO Corporation |
Temperature signal conditioner for Ni sensors; Current and voltage output signal; Configuration via software; Supply voltage: 24 VDC; 6 mm module width; light gray |
| 857-800 |
WAGO Corporation |
Temperature signal conditioner for RTD sensors; Current and voltage output signal; Configuration via DIP switch; Supply voltage: 24 VDC; 6 mm module width; light gray |
| 857-801 |
WAGO Corporation |
Temperature signal conditioner for RTD sensors; Current and voltage output signal; Configuration via software; Supply voltage: 24 VDC; 6 mm module width; light gray |
| 857-815 |
WAGO Corporation |
Temperature signal conditioner for RTD sensors; Current output signal; Power via output; 6 mm module width |
| 857-810 |
WAGO Corporation |
Temperature signal conditioner for thermocouples; Current and voltage output signal; Configuration via DIP switch; Supply voltage: 24 VDC; 6 mm module width; light gray |
| 857-811 |
WAGO Corporation |
Temperature signal conditioner for thermocouples; Current and voltage output signal; Configuration via software; Supply voltage: 24 VDC; 6 mm module width; light gray |
| 280-765 |
WAGO Corporation |
Terminal block for pluggable modules; 10-pole; with 4-conductor terminal blocks; with marker carrier; with orange separator; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; gray |
| 280-636 |
WAGO Corporation |
Terminal block for pluggable modules; 14-pole; with 4-conductor terminal blocks; with orange separator; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; gray |
| 280-618 |
WAGO Corporation |
Terminal block for pluggable modules; 4-pole; with 2-conductor terminal blocks; with orange separator; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; gray |
| 280-762 |
WAGO Corporation |
Terminal block for pluggable modules; 4-pole; with 4-conductor terminal blocks; with marker carrier; with orange separator; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; gray |
| 280-619 |
WAGO Corporation |
Terminal block for pluggable modules; 6-pole; with 2-conductor terminal blocks; with orange separator; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; gray |
| 280-609 |
WAGO Corporation |
Terminal block for pluggable modules; 6-pole; with 4-conductor terminal blocks; with orange separator; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; gray |
| 280-638 |
WAGO Corporation |
Terminal block for pluggable modules; 8-pole; with 2-conductor terminal blocks; with orange separator; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; gray |
| 09628100975 |
Harting |
Terminal housing f. m. Han10B 1lever 73 |
| 09140009976 |
Harting |
Terminal shielded module |
| 869-110 |
WAGO Corporation |
Terminal strip; 10-pole; without push-buttons; with fixing flanges M3; for screw or similar mounting types; Fixing hole 3.2 mm Ø; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; gray |
| 869-140 |
WAGO Corporation |
Terminal strip; 10-pole; without push-buttons; with fixing flanges M3; for screw or similar mounting types; Fixing hole 3.2 mm Ø; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; light gray |
| 869-210 |
WAGO Corporation |
Terminal strip; 10-pole; without push-buttons; with fixing flanges M4; for screw or similar mounting types; Fixing hole 4.2 mm Ø; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; gray |
| 869-240 |
WAGO Corporation |
Terminal strip; 10-pole; without push-buttons; with fixing flanges M4; for screw or similar mounting types; Fixing hole 4.2 mm Ø; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; light gray |
| 869-160 |
WAGO Corporation |
Terminal strip; 10-pole; without push-buttons; with snap-in mounting feet; for plate thickness 0.6 - 1.2 mm; Fixing hole 3.5 + 0.1 mm Ø; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; gray |
| 869-190 |
WAGO Corporation |
Terminal strip; 10-pole; without push-buttons; with snap-in mounting feet; for plate thickness 0.6 - 1.2 mm; Fixing hole 3.5 + 0.1 mm Ø; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; light gray |
| 869-111 |
WAGO Corporation |
Terminal strip; 11-pole; without push-buttons; with fixing flanges M3; for screw or similar mounting types; Fixing hole 3.2 mm Ø; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; gray |
| 869-141 |
WAGO Corporation |
Terminal strip; 11-pole; without push-buttons; with fixing flanges M3; for screw or similar mounting types; Fixing hole 3.2 mm Ø; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; light gray |
| 869-211 |
WAGO Corporation |
Terminal strip; 11-pole; without push-buttons; with fixing flanges M4; for screw or similar mounting types; Fixing hole 4.2 mm Ø; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; gray |
| 869-241 |
WAGO Corporation |
Terminal strip; 11-pole; without push-buttons; with fixing flanges M4; for screw or similar mounting types; Fixing hole 4.2 mm Ø; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; light gray |
| 869-161 |
WAGO Corporation |
Terminal strip; 11-pole; without push-buttons; with snap-in mounting feet; for plate thickness 0.6 - 1.2 mm; Fixing hole 3.5 + 0.1 mm Ø; 2.5 mm²; CAGE CLAMP®; 2,50 mm²; gray |
